SFP 1000BASE-SX DDM 850nm LC MMF 550m
SFP SX LO-SF-1G-SX optical transceiver DDM LC MMF 550 m supports multimode optical fiber. Data rate up to 1.25Gbps Ethernet. Maximum distance – 550 m. LC duplex optical connector. MSA compliant. Applicable to switches, converters, routers, or server cards.
It is an alternative of, e.g,: Cisco GLC-SX-MM, Allied AT-SPSX, Brocade E1MG-SX-OM, Extreme I-MGBIC-GSX, D-Link DEM-311GT, Hirschmann M-SFP-SX/LC, HP: J4858B, J4858C, J4858A; H3C JD118B, Huawei 02315204, Juniper EX-SFP-1GE-SX, MikroTik S-85DLC05D, Moxa SFP-1GSXLC, Netgear AGM731F, Palo Alto PAN-SFP-SX, TP-Link TL-SM311LM; 3Com 3CSFP91
10 YEARS of experience
EASY RETURNS also for B2B
WARRANTY 2 years
SFP SX Module
The SFP 1000Base-SX module transmits data over two multimode fibers (MM) with maximum data rate of up to 1.25 Gbps. It operates on a TX 850 nm wavelength and has an LC/UPC duplex optical connector. It is compliant with the MSA (Multi-Source Agreement).
The module can transmit data for distances of up to 500 m, but it can be used for links as short as 1 m, without the risk of damaging the laser.
All modules are programmed before shipment to be compatible with any vendor of a switch, converter, or server card. If the vendor of your choice is not on the list, select "Others" and specify the model of the device in the textbox.
Basic Parameters
LightOptics LO-SF-1G-SX – SFP 1.25 Gbps 850 nm LC MMF DDM 550 m:
- Duplex type transmission – two multimode fibers (MM)
- SFP Data Rate – up to 1.25 Gbps
- Max distance of transmission – up to 500 m
- Wavelength – 850 nm TX
- Optical connector – 2 x LC/UPC
- Built-in DDM/DOM diagnostic module
- Compatible with the majority of network vendors
- MSA compliant
Can be used as an alternative of:
Model | LO-SF-1G-SX |
---|---|
Warranty | 24 months |
Transmission Type | Duplex |
Interface Type | SFP |
Bit Rate | 1G |
Medium (Fiber) | MMF multimode |
Transmission | Duplex |
Connector | 2xLC/UPC |
Range | 0,55 km (550m) |
Operating Temperature | 0 +70 C |