Industrial Switch 4*10/100/1000Base-T RJ45, 2*1000M fiber ports (SFP)

Industrial switch 

Unmanaged POE network switch model LO-FS-4FT2GT-POE designed for industrial environments. 4x RJ45 10/100/1000 Mbps, 1x optical SFP port 1000Mbps. The RJ ports support Auto-MDI-MDI-X. Can be used as an industrial media converter, enables change from copper 10/100/1000 Base-T to optics 1000M SFP, and vice versa. Compact and airtight chassis with IP40 protection class ensures jitter-free operation of the switch in industrial conditions. The operating temperature ranges from -40 to +85 ℃, suitable for outdoor operation. Power budget: 12-48 VDC (screw connector), power supply not included. 

Suggested external power supply: HDR-15-48

 APPLICATION 

• Conversion from RJ45 to any optical fiber
• Extension of the transmission distance over fiber optic cable (up to 120km = the ZX+ module)
• Operation in extreme industrial conditions, working temperature from: -40 to +85C; IP40 protection class; redundant power supply (screw connector)
• Provides communication and powering for remote locations, such as production halls, wind plants, energy stations

RELIABLE AND JITTER-FREE OPERATION

• Increased reliability and safety of the switch due to the possibility of using two redundant power supplies. In case of a failure of one power supply or power outage from one source, the switch will receive power from the other power supply unit, without impact to the transmission process

• Dust-proof compact chassis

• The hermetic design of the chassis with IP40 protection class ensures that the switch can operate in adverse conditions

• Surge protection of 6 kV protects the device from damage caused by possible power line failures

• High quality components ensure higher MTBF (Mean Time Between Failure). The use of passive heat dissipation (no fans) further increases the reliability of the switch and reduces power consuption

• Excellent heat dissipation due to the use of a radiator chassis, further reducing failure rate and power consumption.

• Easy installation thanks to DIN rail

PLUG&PLAY, EASY INSTALLATION

For your convenience, no initial configuration is needed and the device can operate right out of the box thanks to the Plug & Play system.

The switch can operate as a standalone device or be mounted on a DIN rail.

WARRANTY AND SUPPORT 

At LightOptics we provide you with expert advice. We help you choose and implement the best solutions for your network. 

LightOptics industrial switches come with a 5-year warranty. 

LO-IGS-2GT1GF INDUSTRIAL SWITCH – BASE INFO 

• compact size - small switch(L×W×H): 128mm×115mm× 33mm
• data rate autonegotiation on the RJ45 10/100/1000Mbps ports
• power redundancy,
• LED indicators for power and connection monitoring
• power failure signaling,
• support for all MSA (Multi-Source Agreement) compliant SFP modules
• high reliability, compact monolithic chassis, no fans
• passive heat dissipation,
• operating range from -40 ℃ to 85 ℃,
• humidity: 5%~95% (no condensation)
• 6 kV surge protection
• PE protection - guaranteed grounding via DIN rail
• low power consumption
• IP40 protection degree
• suitable for mounting on a DIN rail
• input voltage: 12/48 VDC screw connector
• electromagnetic compatibility (EMC) in compliance with category 4.