SFP+ 10G BiDi Tx1330nm/ Rx1270nm LC DDM SMF 20km (DFB+PIN) 10GBASE-BX

The LightOptics LO-SP-10G-3S2-20 -SFP+ BiDi 10 Gbps Tx 1330nm Rx 1270nm LC SMF DDM 20km optical module supports single mode WDM fiber (simplex transmission over a single fiber), transmitting data at speeds up to 10,3Gbps, maximum distance up to 10km. TX transmitter – DFB 1330nm laser, RX receiver – PIN photodetector 1270nm. LC/UPC optical connector.

Pairs with: LO-SP-10G-2S3-10

For connection over a single fiber (1J), the wavelength of the transmitter is cross-selected, so that the TX value from one side corresponds to the RX value on the other side. For easier identification, the handles of the transceivers are labelled with different colors, for example blue and green, blue and yellow, blue and violet.

The transceivers support the WDM technology, which provides bidirectional (Bi-Di) transmission over one single-mode 9/125μm optical fiber and operate on two different wavelengths: 1270nm and 1330nm.

Application  

LightOptics modules are perfect for devices such as switches, converters, routers or servers from the majority of manufacturers available on the market, thanks to the constantly growing compatibility that adapts to new products and changing software.  

LightOptics SFP+ 1000Base-BX modules are versatile and work reliably at distances of up to 20km but also on very short links. You can connect them with a patch cable as short as 1m without fear of damaging the laser, thanks to the special design of the receiving diode.  

No more hassle with transceiver detection  

Why should you invest in LightOptics SFP+ modules?   

• You receive a compatible transceiver that your switch, converter, server or router can detect seamlessly.  
• This model is characterized by the notable reliability of its components, which translates to its repeatable compatibility.
• You get a transceiver that works steadily and does not overheat.  
• Additionally, you will receive a control tool for your network: The built-in DDM diagnostic module, which will allow you to monitor the transceiver’s parameters in real time: input and output optical power, temperature, voltage and current.  

LightOptics offers excellent quality for a reasonable price. Our products are manufactured in compliance with the MSA Specification They are compliant with professional standards, as well as all electrical and electromagnetic requirements.

Proven quality, rigorous testing  

High quality and repeatability for the safe and steady operation of your network – that's our goal.

The compatibility of the module is the effect not only of its programming, but also of the high standards of the production process. Our engineers adapt the transceivers to work with various networking devices, and ensure their seamless detection in switches, routers, servers or interface cards. The reliability of the transceivers is proven with rigorous testing.

LightOptics modules are perfect for devices such as switches, converters, routers or servers from the majority of manufacturers available on the market, thanks to our adaptability to new products and changing software. 

Diagnostics of your Network  

The DDM diagnostic module enables real time monitoring of the operating parameters of your transceiver, for example, the input and output optical power, temperature, voltage or current. Be in control over your network and prevent malfunctions thanks to quick and easy diagnosis of the network, with no additional equipment needed.   

To get access to the DDM diagnostics, both the transceiver and the device must possess the DDM function, sometimes called DOM (nearly all managed devices are equipped with this function).

Model LO-SP-10G-3S2-20 can be used as an alternative for:

• Cisco SFP-10G-BXD-I, SFP-10G-BX20D-I,
• Brocade 10G-SFPP-BXD-20K,
• Ciena 12821,
• Dell 331-5310, GP-SFP-10GBX-D-20,
• D-Link DEM-436XT-BXD, DEM-432XT-DD,
• Extreme 10GB-BX20-D,
• Huawei SFP-10G-BXD2,
• Juniper  EX-SFP-10GE-BX32-20,
• MikroTik  S+32LC10D, 
• ....
•  

Warranty and support

Are you wondering which model would work best with your device? We will help you choose and implement the best solution for your company!   

You don’t have to waste time analyzing the parameters of the transceiver on your own, our sales team will select the model that perfectly matches your device, and the technical department will program it accordingly before shipment.  

The transceivers have a full 24-month warranty.   

Basic Parameters   

The LightOptics LO-SP-10G-3S2-20 - SFP+ BiDi 10Gbps Tx1330nm, Rx1270nm  LC SMF DDM 20km Transceiver is:

• dedicated for singlemode transmission (simplex-type transmission)   
• a WDM/BiDi transceiver with maximum data rate of 10,3Gbps
• a versatile SFP module that can work reliably at distances of up to 20km, as well as on very short lines. You can connect them with a 1m patch cable without fear of damaging the module's laser, thanks to the special design of the receiving diode.   
• An SFP transceiver compatible with the majority of network devices available on the market, thanks to our technical team who constantly expand and update the compatibility of our devices, adapting them to new products and changing software.   
• Of excellent quality and reliability provided for the safe and steady operation of your network by our team of engineers    
• an SFP transceiver manufactured according to the Multi-Source Agreement specifications, that can work efficiently within the whole temperature spectrum and is resistant to electromagnetic interference
• customizable- the module is configured to your device. To make the process of installation and identification easier, your transceiver is programmed before shipment. For clarity, the transceiver will be labeled with the name of the manufacturer to which it is adapted to.

Modules that you can program on your own thanks to the LightBoard Configuration Tool

Configure your LightOptic SFP transceivers whenever you need and reconfigure them at any place and time. Thanks to LightBoard- it’s possible!

• LightBoard is an easy-to-use mobile configuration tool that allows you to configure your LightOptic transceivers by yourself. You can adjust the models to most devices available on the market in just a minute!   
• Additionally, the tool allows easy reconfiguration of LightOptics transceivers that are already in use, giving them a second life. Save storage space while retaining the flexibility of working with many brands at once.   
• LightBoard supports all LightOptics transceivers: SFP, SFP+, XFP, QSFP+ 40G, QSFP28 100G. The device operates in the cloud, so it automatically updates to new versions. It is designed for programming only LightOptics transceivers and DAC cables.