Pentru a comandaSFP+ 10G SR către HP/Aruba 850nm LC DDM MMF 300m Model: LO-HPSP-10G-SR18,62 EUR 22,90 EUR
Disponibilitate mareSFP+ SR 10Gbs 850nm LC DDM MMF 300m (VSCEL+PIN) pentru HP BLADE Model: LO-BLSP-10G-SR18,62 EUR 22,90 EUR
Disponibilitate mareSFP+ LR 10G către HP/Aruba 1310nm LC DDM SMF 10km Model: LO-HPSP-10G-LR23,52 EUR 28,93 EUR
Disponibilitate mareSFP+ 10G TX UTP 80m (pentru HP și Aruba) Model: LO-HPSP-10G-RJ61,74 EUR 75,94 EUR
Disponibilitate mareSFP+ 10G BiDi către HP/Aruba Tx1270nm/ Rx1330nm LC SMF DDM 20km 10Gb (DFB+PIN) Model: LO-HPSP-10G-2S3-2055,86 EUR 68,71 EUR
Disponibilitate mareSFP+ 10G BiDi către HP/Aruba Tx1330nm/ Rx1270nm LC SMF DDM 20km 10Gb (DFB+PIN) Model: LO-HPSP-10G-3S2-2055,86 EUR 68,71 EUR
SFP+ for HP/ARUBA
Enhanced Small Form-Factor Pluggable Transceivers are fiber optic transceivers supporting data rate of 10Gigabit Ethernet.
SFP+ Transceiver is an enhanced version of the SFP transceiver that supports higher data rates, developed due to the growing demand for channel capacity of devices such as switches, routers, converters, firewalls.
Parameters
SFP+ transceivers support multimode and single-mode optical fibers.
TYPES OF SFP+ TRANSCEIVERS
Duplex-type transmission. The signal is sent and received over the same wavelength, but within two separate fibers, which prevents signal interferences. These transceivers operate on wavelengths of 850nm/ 1310nm /1550nm.
SFP+ SR – operates on 850nm wavelenght, with maximum distance of 300m, dedicated for multimode fibers.
SFP+ LR- operates on 130nm wavelenght, with maximum distance of 10km, dedicated for multimode fibers.